EWM TH AMT Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 23

background image

Safety instructions

General

6

099-019400-EW501

25.02.2016

2.3 General

WARNING

Risk of accidents due to non-compliance with the safety instructions!
Non-compliance with the safety instructions can be fatal!

•  Carefully read the safety instructions in this manual!
•  Observe the accident prevention regulations and any regional regulations!
•  Inform persons in the working area that they must comply with the regulations!

Validity of the document!
This document is valid only in combination with the operating instructions for the
product being used!

• Read and observe the operating instructions for all system components, especially the

safety instructions!

CAUTION

Obligations of the operator!
The respective national directives and laws must be observed for operation of the
machine!

• National implementation of the framework directive (89/391/EWG), as well as the

associated individual directives.

• In particular, directive (89/655/EWG), on the minimum regulations for safety and health

protection when staff members use equipment during work.

•  The regulations regarding work safety and accident prevention for the respective country.
•  Setting up and operating the machine according to IEC 60974-9.
•  Check at regular intervals that users are working in a safety-conscious way.
•  Regular checks of the machine according to IEC 60974-4.

Damage due to the use of non-genuine parts!
The manufacturer's warranty becomes void if non-genuine parts are used!

• Only use system components and options (power sources, welding torches, electrode

holders, remote controls, spare parts and replacement parts, etc.) from our range of
products!

• Only insert and lock accessory components into the relevant connection socket when the

machine is switched off.

2.4

Transport and installation

CAUTION

Damage due to supply lines not being disconnected!
During transport, supply lines which have not been disconnected (mains supply leads,
control leads, etc.) may cause hazards such as connected equipment tipping over and
injuring persons!

• Disconnect supply lines!

«
...
4
5
6
7
8
...
»

Содержание TH AMT
























Отзывы:

Нет отзывов

Похожие инструкции для TH AMT

Бренд: Y-cam Страницы: 12

Бренд: Samsung Страницы: 88

Бренд: Samsung Страницы: 215

Бренд: JANE Страницы: 6

Бренд: Baja Designs Страницы: 6

TENSIONED CONTOUR ELECTROL

Бренд: Da-Lite Страницы: 8

Бренд: Dacor Страницы: 4

Бренд: Vello Страницы: 12

PORTABLE AIR CONDITIONER & COOLER

Бренд: Icebreeze Страницы: 12

Бренд: Omega Engineering Страницы: 2

Бренд: Oki Страницы: 52

Бренд: Rally Pack Страницы: 2

Бренд: rako Страницы: 3

Бренд: Panasonic Страницы: 242

Бренд: Metric Halo Страницы: 21

Бренд: CAME Страницы: 2

Бренд: Hama Страницы: 138

Бренд: CB Sabbiatrici Страницы: 43

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды