EWM Tetrix 300 AC Smart 2.0 puls, Руководство пользователя

Страница: 36 / 39

Technical data
Tetrix 300 AC/DC
36
099-000235-EW501
17.12.2020
8.2 Tetrix 300 AC/DC
TIG MMA
Welding current (I
2
) 5 A to 300 A
Welding voltage according to stan-
dard (U
2
)
10,2 V to 22,0 V 20,2 V to 32 V
Duty cycle DC at 40° C
[1]
30 % - 300 A
35 % 300 A -
60 % 260 A
100 % 210 A
Open circuit voltage (U
0
) 63 V
Mains voltage (Tolerance) 3 x 400 V (-25% to +20 %)
Frequency 50/60 Hz
mains fuse
[2]
3 x 16 A
Mains connection cable H07RN-F4G2,5
max. Connected load (S
1
) 11,7 kVA 17 kVA
Generator rating (Rec.) 23 kVA
Cos φ / efficiency 0,99 88 %
Protection class / Overvoltage
category
Ⅰ
/
Ⅲ
Contamination level 3
Insulation class / protection
classification
H / IP 23
Residual current circuit breaker Type B (recommended)
Noise level [3] <70 dB(A)
Ambient temperature [4] -25 °C to +40 °C
Machine cooling / Torch cooling Fan (AF) / gas or water
Workpiece lead (min.) 35 mm 2
EMC class A
Safety marking / /
Standards used See declaration of conformity (appliance documents)
Dimensions (l x b x h) 539 x 210 x 415 mm
21.2 x 8.3 x 16.3 inch
Weight 22,6 kg
49.8 lb.
[1] Load cycle: 10 min. (60 % DC ≙ 6 min. welding, 4 min. pause)
[2]
Safety fuses are recommended DIAZED xxA gG. When using automatic cutouts, the "C" trigger chara-
cteristic must be used.
[3] Noise level during idle mode and operation under standard load according to IEC 60974
‑
1 at the ma-
ximum operating point.
[4]
Ambient temperature dependent on coolant! Observe coolant temperature range!