EWM T 4.01 Скачать руководство пользователя

Страница: 36 / 71

Functional characteristics

TIG welding

099-00T401-EW501

01.02.2022

5.1.9 Welding torch (operating variants)

Different torch versions can be used with this machine.

Functions on the operating elements, such as torch triggers (BRT), rockers or potentiometers, can be mo-

dified individually via torch modes.

Explanation of symbols for operating elements:

Symbol

Description

Press torch trigger

Tap torch trigger

Tap and press torch trigger

5.1.9.1 Tapping function (tap torch trigger)

Tapping function: Swiftly tap the torch trigger to change the function. The set torch mode determines the

operating mode.

5.1.9.2 Torch mode setting

Modes 1 to 6 and 11 to 16 are available to the user. Modes 11 to 16 feature the same functionality as 1 to

6, but without the tapping function

> see 5.1.9.1 chapter

for the secondary current.

The functionality of the individual modes can be found in the corresponding torch type tables.
The torch modes are set using the torch configuration parameters "

" in the machine configuration

menu > torch mode "

> see 5.7 chapter

Only the modes listed are suitable for the corresponding torch types.

5.1.9.3 Up/down speed

Functionality

Press and hold the up push-button:

Increase current up to the maximum value (main current) set in the power source.
Press and hold the down push-button:

Decrease current to the minimum value.
Use the machine configuration menu

> see 5.7 chapter

to set the up/down speed parameter

which

determines the speed with which a current change becomes effective.

5.1.9.4 Current jump

By tapping the corresponding torch trigger the welding current can be determined in an adjustable jump

range. Each tap will cause the welding current to jump up or down by the defined value.
The “current jump” parameter

is set in the machine configuration menu

> see 5.7 chapter

Содержание T 4.01








































































Результаты поиска

Содержание T 4.01

Отзывы:

Похожие инструкции для T 4.01

Бренды по названию

Популярные бренды

EWM T 4.01, Руководство по эксплуатации

Результаты поиска

Содержание T 4.01

Отзывы:

Похожие инструкции для T 4.01

Бренды по названию

Популярные бренды