Commissioning
Area of application – proper usage
Item No.: 099-008197-EWM01
7
5
Commissioning
5.1
Area of application – proper usage
This remote control may only be connected to the remote control connection socket identified as
such in the welding machine operating instructions.
Always observe the operating instructions for the welding machine.
The remote control must never be connected to a wire feed unit.
The power source must always be switched off before the remote control plug is plugged into the
remote control socket and locked.
5.1.1
For operation only with the following equipment
• TETRIX 270 AC/DC
• TETRIX 350 AC/DC
• TETRIX 500 AC/DC
5.2
Connecting the remote control
• First connect the remote control connector cable to the remote control, then connect to the power
source and lock using the clamping nut. The plug can only be inserted in one direction.
5.3
Basic settings
• Preset the maximum welding current required for the welding task on the welding machine, set the
welding parameters for the welding task correspondingly, and ensure that the unit is set to TIG
welding.
5.4
Standard Mode
Operating
element
Action Result
Set a reduced welding current
Set alternating current frequency
Set the alternating current balance
6
Warranty
The details of the guarantee, the chapter on Maintenance and Care, and tips on disposal of the
unit can be found in the operating instructions for the power source.
