EWM Phoenix 355 Expert 2.0 puls MM TKM, Руководство по эксплуатации

Страница: 31 / 51

Design and function
MIG/MAG welding
099-005445-EW501
22.9.2022
31
Unsatisfactory welding results due to faulty wire feeding!
The wire feed rolls must be suitable for the diameter of the wire and the material. The wire feed
rolls are colour-coded to facilitate distinction (see the Wire feed roll overview table). When
working with a wire diameter of > 1.6 mm the drive has to be converted for the wire feed kit ON WF
2,0-3,2MM EFEED
> see 10 chapter
.
Wire feed roll overview table:
Material Diameter Colour code Groove form
 mm  inch
Steel
Stainless steel
Brazing
0.6 .024 monochrome light pink -
V-groove
0.8 .031 white
0.8
0.9
1.0
.031
.035
.039
bicolour white blue
1.0
1.2
.039
.047
blue red
1.4 .055 monochrome green -
1.6 .063 black
2.0 .079 grey
2.4 .094 brown
2.8 .110 light green
3.2 .126 purple
Aluminium 0.8 .031 bicolour white yellow
U-groove
0.9
1.0
.035
.039
blue
1.2 .047 red
1.6 .063 black
2.0 .079 grey
2.4 .094 brown
2.8 .110 light green
3.2 .126 purple
Flux cored wire 0.8 .031 bicolour white orange
V-groove, knurled
0.9
1.0
.035
.039
blue
1.2 .047 red
1.4 .055 green
1.6 .063 black
2.0 .079 grey
2.4 .094 brown