Safety instructions
Transport and installation
099-008060-EW501
19.02.2013
9
2.4
Transport and installation
CAUTION
Risk of tipping!
There is a risk of the machine tipping over and injuring persons or being damaged itself
during movement and set up. Tilt resistance is guaranteed up to an angle of 10°
(according to EN 60974-A2).
•
Set up and transport the machine on level, solid ground!
•
Secure add-on parts using suitable equipment!
•
Replace damaged wheels and their fixing elements!
•
Fix external wire feed units during transport (avoid uncontrolled rotation)!
Damage due to supply lines not being disconnected!
During transport, supply lines which have not been disconnected (mains supply leads,
control leads, etc.) may cause hazards such as connected equipment tipping over and
injuring persons!
•
Disconnect supply lines!
2.5
Calibration device (KLE)
WARNING
Risk of accident due to improper transport of machines that may not be lifted!
Do not lift or suspend the machine! The machine can fall down and cause injuries! The
handles and brackets are suitable for transport by hand only!
•
The machine may not be lifted by crane or suspended!
