TIP REPLACEMENT
Note: Tip replacement or cleaning should be done only when the soldering gun is powered down and at room
temperature. After taking out the tip, remove any oxide dust that may have formed in the barrel. Be careful not
to get dust into your eyes. Install a new tip and tighten the screw.
GENERAL CLEANING
The outer casing of the soldering gun could be cleaned with a damp cloth using small amounts of liquid
detergent. Never submerse it into liquid or allow any liquid to enter its casing. Never use solvent to clean the
casing.
SUPPLIED WITH
•
Long Life soldering tip chisel 2.5mm MR25
•
Metal soldering iron rest support
TIPS SELECTION
MR10 Long Life soldering tip conical 1.0mm
MR15 Long Life soldering tip conical 1.5mm
MR25 Long Life soldering tip chisel 2.5mm
MR40 Long Life soldering tip chisel 4.0mm