FUNCTIONS
•
Transparent plastic window: Check the tin process
•
Solder diameter adjuster: Adjust it to allow solder of different diameters (0.5-1.5mm) through.
•
Back solder feed: Thread the solder from the solder reel through the back solder feed and then pull
the trigger.
•
Temperature knob: Turn the knob to set the temperature.
•
Solder length adjuster: It is used for adjusting the solder length which is fed to the tip. Turn clockwise
to make it shorter and counter-clockwise to make it longer.
•
Solder feed adjuster: It is used for adjusting the position of solder which is fed to the tip up and down.
•
Solder diameter adjuster: Before feeding solder, turn counter-clockwise to make the solder wire getting
in; Then turn clockwise to make the solder wire well-fitted.
•
Trigger: Pull the trigger to feed solder through the tube.
•
Power indicator: Power on with green light on. BE CAREFUL WITH HOT TIP!
•
Heating indicator:
a)
Red light on- The gun is heating up.
b)
Red light off/ flashing - The gun has reached the temperature.
•
Tip fixings: The ring and mini screw to fix the tip tightly.
•
Solder reel: With its hexagonal hole, you can wind the solder wire by a 6mm
hex key, or by its own hexagonal rod/an electric screwdriver.