User Manual
EW-M47
DO NOT use your chair while the drive are disengaged unless you are in the
presence of an attendant! DO NOT disengage the drive motors when your chair
is on an incline. The chair could roll down on its own, causing injury!
Free wheel Levers
1.For your convenience, the chair is equipped with two
free wheel levers. These levers allow you to disengage
the drive motors and maneuver the chair manually
when encountered malfunction or stop.
2.In traveling, set the two metallic levers (C) to the Drive
position. (See Fig. 6)
3.Battery box w/plug put
in front position.
Battery box w/reflector
put in rear position.
(C)
Footrests Height Adjustment
1.Take off both side's height fixation screws (A). (See Fig. 4)
2.Adjust to required position.
3.Aim for the required hole's
position to tighten height
fixation screw.
•
Careful not to interfere with
front wheel when adjusting
(A)
7
(B)
(B1)
(B2)
( Rear)
(Front)
Seat Belt Usage
1.Prior driving fasten the seat
belt as the picture illustrates (B) (B1). (See Fig. 5)
2.Seat Belt can be unfastened by pressing down the
red button (B2). (See Fig. 5)
Armrest Height Adjustment
1.Use tool adjust armrest height
to the required hole's position.
(See Fig. 7. E)
2.Aim for the hole's position
to tighten Screw (D).
Figure 7
(D)
(E)
Figure 4
Figure 5
Figure 6