Instruction Booklet
EW-M41
14
CARE AND MAINTENANCE
1.Before using the mobility scooter, make sure all nuts and bolts are tight. Check all parts
for damage or wear and replace where required. Check all parts for correct placements
and adequate adjustments.
2.Ensure that batteries are well maintained and charged as instructed in page 9 in this
manual.
3.The wheels and tires should be checked periodically for cracks and wear, and should
be replaced by a qualified technician.
4.Regularly check for loose nuts and/or bolts in the front and drive wheels. If loose, have
them adjusted by a qualified technician.
5.Clean, dust and grease from exposed components.
6.Periodically have the bearings of the front wheel checked to make sure they are clean
and free from rust or moisture hazards.
Recommended maintenance procedures :
Before cleaning the mobility scooter, use the following tips:
‧
Only use a damp cloth and gentle detergent.
‧
Do not apply any abrasive or acidic substances during cleaning of the scooter, to avoid
damages to the scooter.
‧
Do not use high-pressure hose to clean your scooter.
‧
Do not allow any direct contact with water on any of the electrical parts of this scooter.
Cleaning your mobility scooter :
