Contetns
eLR100-UL-00 Manual for Consumer Products, Rev. 0.2, 02/2020
14 | 24
3.3.
LORA BEHAVIOR EXAMPLE (LORACOMMUNICATION.INO)
Figure 13. UART Pad Description
LoRa Module Communication : Arduino Software UART Port (D2,D3)
-
Baud rate: 38400
-
Data bit: 8bit
-
Stop bit: 1bit
-
Parity bit: None
LoRaCommunication.ino example If you appear in the Console as shown below during the initial run, it
is normal.
LoRa Network Start
LoRa Module Version : 1.1.15‐e07713e‐Darthvader
LoRa Device EUI : 02:02:02:02:02:02:02:02
Select Lora Mode : OTAA (1) or ABP (2) ?
Figure 14. LoRa Command
LoRa motion mode must be selected and operated in either OTAA or ABP mode..
-
Choose according to the purpose and join
-
LoRaWAN. For more information on LoRa, please refer to the LoRaWAN Specification document.
3.3.1.
LoRa Preferences
Refer to the AT‐COMMAND command manual for detailed settings.
If the module does not succeed with Join, check the communication with the Gateway and check the
Network Server.
The initial Class setting for the module is set to Class A.
