8VHUPDQXDOIRUWKHUDLQFDSH9&);
you receive the following accessories with your rain cape:
adapter ring CA 72
To be able to fasten the camera in the rain cape, you first have to
remove the sunshade from the lens.
If you are going to use the Sony Z1 in this cape, please have a look
at the additional instructions.
1. screw the CA72 adapter on the filter thread of the camera
2. put the camera into the rain cape and push it with the adapter
ring against the frontglas.
3. push the camera upwards in the rain cape till the viewfinder is
in front of the rear PVC window.
4. close the cape with both press-studs to avoid that splash water
from the bottom reaches the camera.
The camera can be used on a tripod while it is in the VC-FX rain
cape
www.ewa-marine.de