Operation Manual MK1900HD Series
2/12
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own expense.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)
this device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications to this device void the warranty.
17xxHD -
High Definition Demonstration Camera Positioning System
At 50km the pixels per meter in
height will be 8. Assuming man
is 2m approx. then 8 pixels is
Detection.
At 5km the pixels per meter in
height will be 40. Assuming
man is 2m approx. then 80
pixels is Identification, i.e. it’s a
man or woman.
Please contact ELR for technical assistance: [email protected] | +31 0 85 0441855 (NL).
- High Definition Demonstration Camera Positioning System
WARNING:
Power supplies used with these Cameras operate on 115 Vac or 230 Vac. These voltages are
dangerous. Use extreme care working with equipment connected to either 115 Vac or 230 Vac.
WARNING:
Do not remove covers. There are no user-serviceable parts inside.
CAUTION:
Mount the camera system before the power is applied. After the power is applied the camera system
will start a configuration sequence and pan and tilt movement will occur.
17XXHD - HIGH
DEFINITION DEMONSTRATION CAMERA POSITIONING SYSTEM
