EVS XT-3 Скачать руководство пользователя страница 67

Страница: 67 / 126

Controls and Communications

This rear panel part presents some or all of the following connectors according to your
configuration.

The

Ref Video

connectors allow the server to receive or send back the analog genlock

reference signal.

The

XNet2

connectors allow the interconnection of EVS servers, and/or XStore in an

XNet2 network. The IN connector of a server is connected to the OUT connector of
another server, and so on to form a closed loop network.

The

Multiviewer

connectors allow a monitor to be connected directly to the server, and to

display PGM and REC channels as configured in the Multicam Configuration window, in
the Monitoring tab, Multiviewer page. See the Multicam Configuration manual for a
description of the configuration parameters.

The

Multiviewer

connector provides an analog Multiviewer output on a DA-15

connectors, that can be configured in CVBS, RGB HD or YUV HD.

The

Loop

connector allows the loop of PGM1 on REC1 to be able to use the internal loop

feature.

The

Gigabit-H3X Ethernet

connectors allow the interconnection of servers, other EVS,

and/or third-party systems into a Gigabit Ethernet network, with a global bandwidth of 1
GbE.

The

RS232

connector allows a tablet to be connected to the server.

The

GPI

connector allows GPI (General Purpose Interface) devices to send or receive

electric pulses that will trigger commands on the server or to be connected with third-party
devices.

The

Timecode

connectors allow the server to receive the LTC timecode reference signal

and send the LTC timecode that corresponds to PGM1.

The

Console

connectors allow a monitor and a keyboard to be connected to the server.

Controls and Communications

This rear panel part presents some or all of the following connectors according to your
configuration:

Two

PC LAN

connectors allow connection of the PC LAN interface of the EVS server to

an Ethernet network.

The

Audio Monitoring Output

connector is a DA-15 connector that allows audio output

connections for monitoring purposes.

HARDWARE TECHNICAL REFERENCE MANUAL XT3 Server 12.05

5. Hardware Installation and Cabling

Содержание XT-3































































































































Результаты поиска

Содержание XT-3

Отзывы:

EVS XT-3, Руководство по техническому обслуживанию оборудования, Страница: 67 / 126

Результаты поиска

Содержание XT-3

Отзывы: