EVS Synapse GMD100, Инструкция по установке и эксплуатации

Страница: 23 / 48

Audio_Prst_ActA With this item you can manually change the currently active preset of channel.
Can be any preset between 1 and 16. By default it is set to 1. All menu settings
that are preceded with a ‘#Ins’-prefix are part of the preset.
Audio_Prst_EditA Here you can select which of the 16 selectable presets you want to edit for
Channel A. Changing this will not change the active preset, unless the
currently active preset is the same you are going to edit. All menu settings that
are preceded with a ‘#Ins’-prefix are part of the preset.
#Silence-TimeA If the embedded audio contains silence, this can be reported by the card. This
setting allows you to determine how many seconds it takes before the card
reports the silence. This setting can be set in a range from 1 sec to 255 sec.
The default setting is 10sec.
#Silence-LevelA With this setting you set a loudness threshold for the silence detection. Can
be set between -100 and -20 dBFS. When the audio goes below this value, a
silence alert is triggered. Default is -60dBFS.
#Emb1_GrpSel With this setting you can turn on or off the audio embedder groups
individually. An embedder group can be turned off (muted) by setting the
corresponding group to ‘_’. Can be set to one of the following values (default is
1234):
____ __3_ ___4 __34
1___ 1_3_ 1__4 1_34
_2__ _23_ _2_4 _234
12__ 123_ 12_4 1234
INSTALLATION AND OPERATION MANUAL
Synapse GMD100 | 5. Settings Menu | 15