EVS Synapse GED100, Руководство пользователя

Страница: 23 / 74

#ELossBckupSrc If a loss of Dolby E is detected, a backup PCM source can be set on the Dolby E
decoder output(s). The following schematic displays how this backup functions:
With this ELossBckupSrc setting, you can set the source of the backup PCM:
SDI input, add-on bus channels 1/16 or add-on bus channels 17/32. Default is
SDI .
#ELossBckupCh Here you select a specific audio pair, out of the above selected backup source,
which contains the backup PCM audio pair you would like to set as decoder
output when Dolby E is lost. Ch01/02 through Ch15/16 can be chosen.
Ch01/02
is the default.
#ELossBckupDelay Here you set the delay in milliseconds with which you want to delay the backup
PCM channels. Can be set between 0 and 5000ms. Default is 160ms.
#Bckup2DecOut With this setting you select on which decoder outputs the backup PCM audio
pair should be forwarded if Dolby E is lost on the decoder input. Can be set to
only Ch01/02, only Ch03/04, only Ch05/06, only Ch07/08 or to distribute the
backup PCM audio pair to all decoder outputs. You can also set this to none, in
which case there will be no audio on the decoder outputs when Dolby E is lost
(in other words: the backup is disabled). Default is
None .
5.6. Dolby Encoder
Setting Description
#SourceEncoder01 ~ #SourceEncoder08 The Dolby Digital encoder of the GED100 has 8
inputs, because a Dolby Digital can contain up to 8
channels (for instance in a 7.1 situation). With these
setting you can decide the source of each
individual input:
SDI input, add-on bus channels
1/16, add-on bus channels 17/32 or the output of
the decoder (
DecoderOut ). Default is DecoderOut .
INSTALLATION AND OPERATION MANUAL
Synapse GED100 | 5. Settings Menu | 15