EVS Synapse GDK200, Инструкция по установке и эксплуатации, Страница: 27 / 56

Prgm-Key1-Slice With this setting you set a point in percentage in program key
1 where the fill input should be cut off entirely. The default for
this setting is 0%. The following graph shows how Slice_level
modifies the key (with Keyer set to Key_input).
Pgrm-Key2-Ctrl With this item you select how the Prgm-Key2 setting is
controlled: Manually (manual) or via GPI-triggers (GPI-A, GPI-
B or GPI-C). By default it is set to Manual.
The GPI pools (GPI-A, GPI-B and GPI-C) are defined with the
settings under the header GPI-MODE. Please refer to "GPIs
Explained" for a detailed description of the GPI pool
functionality.
Prgm-Key2 This item sets key2 on or off for the program outputs. Set to
GPI will enable the program keyer 2 to be switched on or off
by GPI-0 closures (refer to chapter 10: GPI pinning). Default is
On.
Prgm-Key2-Fill With this item you select an input which should function as the
fill input for program key 2. Can be SDI-1, SDI-2, SDI-3 or
SDI4. Default is SDI-2.
Prgm-Key2-Key With this item you select an input which should function as the
key input for program key 2. Can be SDI-1, SDI-2, SDI-3 or
SDI4. Default is SDI-2.
Prgm-Key2-In With this setting you can select how long the fade in of
program-key 2 should be when triggered. This can be
between 0 frames and 200 frames. Default is 0 frames.
Prgm-Key2-Out With this setting you can select how long the fade out of
program-key 2 should be when a new key 2 is triggered. This
can be between 0 frames and 200 frames. Default is 0 frames.
INSTALLATION AND OPERATION MANUAL
Synapse GDK200 | 5. Settings Menu | 19