EVS Synapse GDK200 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 56

EVS Synapse GDK200 Скачать руководство пользователя страница 11

3. Quick Start

Powering Up

On powering up the Synapse frame, the card set will use basic data and default initialization settings. All
LEDs will light up during this process. After initialization, several LEDs will remain lit – the exact number
and configuration is dependent upon the number of inputs connected and the status of the inputs.

Default Settings

In its default state, the GDK200 acts as a back-up switcher with only the carrier detector active.

3.1.

Changing Settings and Parameters

The front panel controls or Cortex can be used to change the settings. An overview of the settings can
be found in later chapters of this manual. Please refer to "Settings Menu" on page 10, "Status Menu" on
page 26 "Graphical User Interface" on page 1 and "Events Menu" on page 28.

Front Panel Control

Front Panel Display and Cursor

Settings are displayed and changed as follows:

Use the cursor ‘arrows’ on the front panel to select the menu and parameter to be displayed and/or
changed.

Move forward through the menu structure.

Go back through the menu structure.

Move up within a menu, or increase the value of a parameter.

Move down through a menu or decrease the value of a parameter.

INSTALLATION AND OPERATION MANUAL

Synapse GDK200 | 3. Quick Start |

3

«
...
9
10
11
12
13
...
»

Содержание Synapse GDK200

























































Отзывы:

Нет отзывов