EVS Synapse 2GF100, Инструкция по установке и эксплуатации

Страница: 43 / 50

Pool A now works as follows:
GPI_1 Status GPI_2 Status GPI_3 Status GPI_4 Status Set Value
0 0 0 0 Up-conv Preset 1
1 0 0 0 Up-conv Preset 2
0 1 0 0 Up-conv Preset 3
0 0 1 0 Up-conv Preset 4
0 0 0 1 Up-conv Preset 5
0 1 1 0 Up-conv Preset 4 (because
highest takes priority)
1 1 1 1 Up-conv Preset 5 (because
highest takes priority)
Pool B now works as follows:
GPI_5 Status Set Value
0 A out only
1 B out only
Example 2: One Pool in Binary Mode and One in Priority Mode
Let’s say we would like to control the up-converter presets using Pool A (Up_CtrlA set to GPI-A) in binary
mode and the audio presets using Pool B (Audio_Ctrl set to GPI-B) in priority mode. We could do the
following:
• Set GPI_1 to GPI-A
• Set GPI_2 to GPI-A
• Set GPI_3 to Take A
• Set GPI_4 to GPI Prio B
• Set GPI_5 to GPI Prio B
Pool A now consists of GPI 1, GPI 2 and GPI 3 (as take), in a binary mode, controlling the Up converter
preset. Pool B now consists of GPI 4 and GPI 5 in a priority mode, controlling the audio presets.
INSTALLATION AND OPERATION MANUAL
Synapse 2GF100 - 2GF110 | Appendix 1: GPIs Explained | 35