EVS Synapse 2GF100 Скачать руководство пользователя страница 34

Страница: 34 / 50

sInp1_Map

This item indicates whether the 3Gb/s input on input 1 is Level A or Level B.
When the input is not 3Gb/s, NA is indicated.

This indicates the mapping of the 3Gb/s input 1 when the input format is
1080p50 or 1080p60. Can be Level A or Level B. When the input format is not
3Gb/s, this item indicates NA.

sInp2

This status item indicates the presence and format of a valid signal in input
2. This is displayed as listed under sInp1.

sInp2_VI

Displays the detected VI value found in input 2. This is displayed as listed
under sInp1_VI.

sInp2_WSS-Stnd

Displays the detected WSS-standard value found in input 2. This is
displayed as listed under sInp1_WSS-Stnd.

sInp2_WSS-Extnd

Displays the detected WSS-extended value found in input 2. This is
displayed as listed under sInp1_WSS-ext.

sInp2_s2016

Displays the detected S2016 value found in input 2. This is displayed as
listed under sInp1_s2016.

sInp2_CRC_EDH

This item indicates CRC and EDH errors on input 2. Can be:

•

Error

•

sInp2-Map

This item indicates whether the 3Gb/s input on input 2 is Level A or Level B.
When the input is not 3Gb/s, NA is indicated.

sInp3_WSS-Stnd

Displays the detected WSS-standard value found in input3 (CVBS input).
This is displayed as listed under sInp1_WSS-Stnd.

sInp3_WSS-Extnd

Displays the detected WSS-extended value found in input3 (CVBS input).
This is displayed as listed under sInp1_WSS-ext.

sInpCVBS

This status item indicates the detected input format on the CVBS input. This
is displayed as one of the following values:

•

NTSC-J

•

PAL-BGHID

•

NTSC-M

•

PAL-N

•

NTSC-4.43

•

PAL-M

•

SECAM

•

PAL-60

•

SECAM-525

•

NA (no input detected)

IODelayA

Displays the total delay in ms of outputs A1 and A2. Can be a value between
0ms and 15000 ms.

SwitchLnA

Displays what line is detected the switchline for channel A. Can be any line
between 0 and 1125.

SwitchLn_LenA

Displays the length of the detected switchline of Channel A in pixels.

| November 2021 | Issue 1.00.E

Содержание Synapse 2GF100



















































Результаты поиска

Содержание Synapse 2GF100

Отзывы:

Бренды по названию

Популярные бренды

EVS Synapse 2GF100, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Synapse 2GF100

Отзывы:

Бренды по названию

Популярные бренды