EVS EPSIO LIVE, Руководство пользователя, Страница: 70 / 76

EVS Broadcast Equipment SA Issue 1.70.A February 2014
62 Creating Graphic Animations
3.2 Creating an Offside Animation
3.2.1 Remote Menu with Offside Feature Active
If you want to create an offside line, you need to do the following before you enter the
Epsio menu:
•
Position on the frame where you want to create an offside line animation.
From the main operational menu, press SHIFT+D to enter the Epsio menu:
Offside Arrow Circle Graphics
ChromaK OSD
Graph <-- Calib Calib -->
The Epsio menu is displayed with the Offside tool active.
If the Offside tool is not active, you can activate it as you activate a live tool (See section
3.3.1 ‘How to Activate a Live Tool‘, on page 65.
The Graph feature is active by default.
The
Mark
key is blinking red on the LSM Remote Panel.
The virtual playfield is displayed on the operator’s PGM.
Note
If the playfield limits are automatically detected, the virtual playfield lines are
red. Otherwise, the virtual playfield lines will be white. In this case, you first
need to validate the playfield limits manually.
3.2.2 How to Validate the Playfield Limits
Introduction
Based on the calibration performed, the playfield limits are automatically detected and
matched to the virtual playfield when you enter the offside line mode. In this case, the
virtual playfield lines are displayed in red.
If the image on which you want to create your offside line is slightly blurred, or does not
display enough lines on the playfield for the automatic detection to work properly, the
virtual playfield will be made of white lines.
If the auto-detection of the playfield does not work (white lines) or if the virtual playfield
lines are not perfectly matched to the real playfield, you first have to validate the playfield
limits. This action consists of repositioning the virtual playfield limits onto the real playfield
limits.