EVS EPSIO LIVE, Руководство пользователя, Страница: 14 / 76

EVS Broadcast Equipment SA Issue 1.70.A February 2014
6 Overview
4. Epsio and EVS server IP addresses
Time when the last command was executed on the server.
You need to press
SHIFT
+
D
when you open Epsio and enter the Epsio
menu on the Remote Panel to force the system to check the
communication via the Ethernet network, and confirm the connection.
In the course of operations, the icon will not automatically turn red if you
lose the connection. You need to recheck the communication by entering
again the Epsio menu on the Remote Panel.
5. Information on whether the animation is visible or not.
1.3.4 Camera Angle List
The Camera Angle list shows a thumbnail for each camera angle that has been defined
and/or calibrated. You can select a camera angle by clicking the thumbnail. This Camera
Angle list is particularly useful in the Calibration phase.
When the camera angle has only been created, but not calibrated yet, the thumbnail
shows a grey background and the virtual playfield.
When the camera angle has been calibrated, the thumbnail shows the frame grabbed
from the video signal.
1.3.5 Zoom
The zoom area shows a zoomed display of the area around the mouse pointer on the
operating monitor. It mainly allows performing the calibration, as well as other actions, in
a very précised way.
1.3.6 Tabbed Area
The tabbed area gives access to the following tabs, in which you can configure Epsio and
select the animations you will perform:
•
The CALIB tab allows the users to define and calibrate the camera angles.
See also the section 2.3.2 ‘Calibration Tab’, on page 15.
•
The TOOLS tab allows the users to select the animations they want to perform, and
refine the settings for these animations.
See also the section 2.5.2 ‘Tools Tab’, on page 50
•
The CHROMA tab allows the users to define the chroma key layer that will define
how the offside line animation will be displayed.
See also the section 2.4.5 ‘Chroma Key Tab in Epsio’, on page 44.