background image

Copyright©2015 EVR Electronics. 

All right reserved. Print only for private use. 

www.gsmcontrol.biz

12

5.4 Command P (Password) - Programming password

Use this command to program a new password for the device. Each SMS programming and command must begin
with the password.

Example: 

0000P12341234

Text SMS 

Description

0000

Current password device

P

ID command

1234

New device password (4 numbers)

1234

Repeat new password

If the program is successful, the device replies with the following SMS:

Setup command OK Password Updated

Otherwise, the device will respond with the following text message:

Programming Password Failed

notes:
- The device's default password is 

0000

(four zeros).

- The password must contain only numbers and must have a fixed length of 

4 numbers

.

Note carefully the new device password

.

5.3 Command F (Firmware) - Read firmware version

This command allows you to read the firmware version. 

0000F

Text SMS 

Description

0000 

Password of the device

F ID 

command

If the command is received correctly, the CX36 replies with the following SMS:

GSM-CX36S R2, 357541000172165

Text SMS 

Description

GSM-CX36S R2  code of the device and software version
357541000172165 IMEI Code of GSM

5.2 EC command (Echo) - Enable / Disable Echo SMS

All text messages sent to the CX36 are considered valid and executed only if they start with the correct 4-digit pass-
word. The device return the invalid received SMS to the phone user number 1 (User1). This is convenient for receiv-
ing SMS messages sent by the operator relating to the lapse of the SIM and the related tax credit. The Echo func-
tion can be enabled or disabled by the following command:

0000EC1

Text SMS 

Description

0000

Password of the device

EC

ID command

1

1 = enable function Echo (default); 0 = disable function Echo

For example: if we send the CX36 an SMS with the text ABCDE, User1 will receive the following SMS: SMS ECHO:
ABCDE. If the Echo function is disabled, by sending an SMS with invalid password, the CX36 does not send SMS
but the green LED flashes 3 times outside.

Содержание GSM-THERMO CX36

















Отзывы: