Setting your Ventilation Requirement
Adjust the set ventilation with the Ventilation Rate Adjust button. The setting will cycle
through the different options below.
High ventilation
- Fan will operate at high speeds across a wider range of
temperature to actively work on Air Quality and condensation.
Medium ventilation
-
Fan will operate optimal airflows
(default).
Low ventilation
-
Fan will provide lower airflows while maintaining air quality.
Auto ventilation -
Controller selects Low, Medium or High Ventilation
depending on the difference between the room temperature and your
comfort set temperature.
Low ventilation
is suitable for low occupancy numbers in the house and when total
ventilation requirements may be substituted with opening windows and doors
(summertime).
Medium Ventilation
(default) provides the ideal ventilation requirements for an
average well-insulated home.
High Ventilation
is suitable when there is a higher occupancy in the home or signs of
poor air quality due to increased moisture levels in the house (condensation).
Auto mode
maintains the requirements of the three rates based on temperature in the
home. As well as providing the correct levels of ventilation, the system also tries to
normalise the indoor air temperature to the target comfort level set by the user.
•
•
•
Frequently Asked Questions
Which ventilation rate should I choose?
I turned the controller off. Why does the system keep running?
When turning the controller o
ff the fan enters a shutdown cycle which may take up to a
minute to turn off fully.
•
Wiring Diagrams
Fixed Wires
Com Volts -DC
12-24 Volts +DC
12 Volt AUX
Mode Output
Aux Air Source
NC
NC
7
6
5
4
3
2
1
4a
Controller (back)
4b
Page 2
V1.1:20181005
