Evoqua Wallace & Tiernan SFC-SC, Руководство пользователя, Страница: 65 / 83

WT.050.590.002.UA.IM.0614 50
SFC ANALYZER / CONTROLLER
EVOQUA W3T109634
Softkeys Current softkey assignments
BREAK
SELECT
ENTER
LOCK
MENU
MODE
UNLOCK
BACK
CHANGE
--->
Stop the adaption procedure.
Select one or more options from the list pro-
vided.
Change the operating mode.
Confirm selection/Save input.
Activate password protection.
Select a menu.
Select the “Mode” menu.
Start deactivation of password protection.
Move back one menu level.
Open next diagnosis display.
13s Feed delay
The time until dosing resumes after interrup-
tion.
100% Positioner (Ym)
If the display blinks, the positioner is in manual
mode and cannot be activated.
mA? 1/5 Error indication active (display bottom right)
The system has detected an error. The error
can be specified with the table in section 4.4
“Errors”. The number combination states the
series number of the error message and the
total number of error messages (in this case
the first error of a total of five).
Scroll bar
This is used to indicate the actual menu posi-
tion of the menu arrow. If the selection mark
is at the top, the menu arrow is on parameter
1 (see example). A maximum of eight param-
eters per display is possible.
General messages This function is possible in the MANUAl
mode only!
This message appears, for example, if an at-
tempt is made to calibrate the positioner during
automatic operation. Acknowledge by pressing
ENTER or the ESC key.