9
TOOLS REQUIRED
• Tape Measure
• Pencil
• Spirit Level
• Screwdriver
• PZ2 Screw Bit
INSTALLATION STEPS
1
Remove the two bottom mounted transit brackets from both sides. You will not
need these for the installation.
2
Determine the finished height and position that you want the appliance to
be located. Build your base support taking into consideration the 50mm
ventilation gap under the appliance. Then place the appliance onto the support
and check that it is well supported.
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1
EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1
DS ISS. 12
DS ISS. 12
