7
INSETS MANUAL ISS. 6
INSETS MANUAL ISS. 6
EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1
EVONIC - 104 INSTRUCTION GUIDE TEMPLATE ISSUE 1
MANUAL OPERATION
You can operate your appliance using the manual rocker
switches located on the right hand side.
Please note there is no manual dimmer control.
- To turn on the appliance and activate the flame effect, press
the top rocker switch to the I/On position.
- To activate the heater at Low Heat, press the middle rocker
switch to the I position. To deactivate, switch the rocker
switch back.
- To activate the heater at High Heat, press the bottom rock-
er switch to the II position. To deactivate, switch the rocker
switch back.
- To turn off the heater and flame effect, press the top rocker
switch to the O/Off position.
- If your appliance is fitted with a thermostat you can adjust
the heat output by turning left to decrease the heat, and right
to increase the heat.
REMOTE CONTROL OPERATION
You can operate your appliance using the option-
al remote control. Ensure that the rocker switch
on the appliance is in the I/On position, then you
can use the remote to control the appliance.
- To turn on the flame effect, press the top left
button.
- To activate the heater at Low Heat, press the
bottom left button.
- To activate the heater at High Heat, press the
bottom right button.
- To turn off the heater and flame effect, press
the top right button.
- To activate the dimmer function, press the large
bottom button once to start, and then again to
stop at the desired dimmer setting.
- To turn off the appliance, press the rocker
switch on the appliance to the O/Off position.
