©2009 Evolved Sonic Solutions, LLC
©2009 Evolved Sonic Solutions, LLC
Safety Overview
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance
WARNING:
TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THE APPARATUS TO RAIN OR MOISTURE
CAUTION:
TO REDUCE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER SERVICEABLE PART INSIDE,
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and,
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Contents
SAFETY & WARNINGS
3
Safety Overview
3
Warnings & Caution
4
Important Safety Instructions
SYSTEM FUNCTIONS
6
System Function Description
6
Features
ES2 PACKAGING CONTENTS
7
Components
ES2 TRANSMITTER BASIC SETUP
8
Transmitter Set-Up Diagram
ES2 AMPLIFIER BASIC SETUP
9
Amplifier Set-up Diagram
ES2 AMPLIFIER BI-AMP SETUP
10 Bi-Amplifier Set-up Diagram
INITIAL POWER UP & LINKING
11 Powering and Linking Diagram
OPERATION
12 Basic and Advance Functions
PROGRAMMING
13 Programming Diagram
OPERATIONAL CONFIGURATION
14 Safety Overview
14 Hi-Fi Mono Block
14 Commercial/Distributed
14 Multi-Zone
14 Creating Multi-Zones
14 Warnings & Caution
TROUBLESHOOTING
15 No Wireless Connection
15 Wireless Connection, No Sound
2
3
