Evolve WR150N, Руководство пользователя

Страница: 147 / 160

146
Wireless Repeater Network Name (SSID): choose the SSID you want to implement the repeater
function.
Bridge MAC Address: or you can enter the MAC address.
Channel: select one channel according to the main Router and your method.
Upper/Lower: you can keep it the default setting.
Authentication: select one encryption method for this repeater function.
Encryption: please refer to Wireless Basic Settings .
5.3.4.2 WDS
WDS means Wireless Distribution System. It is a protocol for connecting two access points
wirelessly. Usually, it can be used for the following application:
‹ Provide bridge traffic between two LANs though the air.
‹ Extend the coverage range of a WLAN.
To meet the above requirement, you must set these APs in the same channel and set MAC address of
other APs which you want to communicate with in the table and then enable the WDS.