Evolve AP799 Скачать руководство пользователя страница 3

Страница: 3 / 7

- 3 -

The Interfaces and Buttons on the Rear Panel

Interface/Button

Description

Reset

Press the button for 3 seconds and then release it.
System restores the factory default settings.

Power

Power socket, for connecting the power adapter.

WAN

WAN interface, for connecting WAN or the uplink network
devices.

LAN1~LAN4

LAN interface, for connecting hub, switch, or computer on
LAN.

WPS

WPS: If WPS is enabled, press this button for 1 second,
and then the wireless router starts to accept the
negotiation of PBC mode.

Содержание AP799

Страница 2: ...hut off Green On Connection succeeds Green Blink Negotiation is in progress WPS Off No connection Green On Connection succeeds Green Blink Data is being transmitted WAN Off No WAN connection Green On LAN connection succeeds Green Blink Data is being transmitted LAN1 LAN2 LAN3 LAN4 Off No LAN connection ...

Страница 3: ...s the factory default settings Power Power socket for connecting the power adapter WAN WAN interface for connecting WAN or the uplink network devices LAN1 LAN4 LAN interface for connecting hub switch or computer on LAN WPS WPS If WPS is enabled press this button for 1 second and then the wireless router starts to accept the negotiation of PBC mode ...

Страница 4: ...wer socket on the wall Step2 Connect the ADSL Cable Modem to the WAN interface on the wireless router Step3 Connect your PC to the LAN interface on the wireless router Note You can connect to the router wirelessly by using the wireless configuration tool on the wireless client Please ensure that your Modem s LAN IP address does not conflict the router s IP address ...

Страница 6: ...the 192 168 254 x network segment please follow the steps below to change the IP address of the wireless router 1 Log in to the Web user interface and then choose the Network Settings LAN Interface Settings 2 In the LAN Interface Settings page you can change the IP address and subnet mask of the wireless router 3 Click Save to save the settings ...