manualshive.com logo in svg

Evolution S355 MCS, Оригинальное руководство пользователя, Страница: 11 / 64

Поделиться
Скачать
Evolution S355 MCS Скачать руководство пользователя страница 11

11

www.evolutionpowertools.com

EN

15. Disconnect tools 

before servicing; when 

changing accessories, such as blades, bits, cutters, 

and the like.

16. Reduce the risk of unintentional stating.

 

Make sure switch is in off position before plugging 

in.

17. Use recommended accessories. 

Consult the 

owner’s manual for recommended accessories. 

The use of improper accessories may cause risk of 

injury to persons.

18. Never stand on the tool

 serious injury could 

occur if the tool is tipped or if the cutting tool is 

unintentionally contacted.

19. Check damaged parts. 

Before further use 

of the tool, a guard or other part that is damaged 

should be carefully checked to determine that it 

will operate properly and perform its intended 

function - check for alignment of moving parts, 

binding of moving parts, breakage of parts, 

mounting, and any other conditions that may 

affect its operation. A guard or other part that is 

damaged should be properly repaired or replaced.

20. Direction of feed.

 Feed work into a blade 

or cutter against the direction of rotation of the 

blade or cutter only.

21. Never leave tool running unattended. 

Turn 

power off. Don’t leave the tool until it comes to a 

complete stop.

GETTING STARTED UNPACKING

Caution: 

This packaging contains sharp objects. 

Take care when unpacking.  Remove the machine, 

together with the accessories supplied from the 

packaging. Check carefully to ensure that the 

machine is in good condition and account for all 

the accessories listed in this manual. Also make 

sure that all the accessories are complete. If any 

parts are found to be missing, the machine and its 

accessories should be returned together in their 

original packaging to the retailer. 

Do not throw the packaging away; 

keep it safe throughout the guarantee period. 

Dispose of the packaging in an environmentally 

responsible manner. Recycle if possible. 

Do not let children play with empty plastic bags 

due to the risk of suffocation.

SERIAL NO. / BATCH CODE

 

The serial number can be found on the motor 

housing of the machine.

  

For instructions on how to identify the batch 

code, please contact the Evolution Power Tools 

helpline or go to: 

www.evolutionpowertools.com

ITEMS SUPPLIED

Description

Quantity

Instruction Manual 

1

14”  (355mm) Mild Steel TCT Blade 

1

Double ended hex key 
5mm/8mm (Blade Change)

1

V-Block

3

Cutting head assembly

1

Base/table assembly

1

Rail bracket and fixings

1

Thumb screws

3

Top clamp

1

Clamp cross bar

1

Front clamp

2

REPLACEMENT BLADES

Description

Part No

14” (355mm)  

Multi-Material Cutting 

TCT Blade

(UK/EU) RAGEBLADE-

355MULTI

(USA) RAGE355BLADE

14” (355mm)  

Diamond Blade

(UK/EU) RAGEBLADE-

355DIAMOND

(USA) 14BLADEDM

14” (355mm) Mild Steel 

Cutting Blade

(UK/EU) M355TCT-66CS

(USA) 14BLADEST

14” (355mm) Stainless 

Steel Cutting Blade

(UK/EU) S366TCT-90CS

(USA) 14BLADESS

14” (355mm) Thin Steel 

Cutting Blade

(UK/EU) T355TCT-90CS

(USA) 14BLADETS

14” (355mm) 

Aluminium/ Aluminum 

Cutting Blade

(UK/EU) A355TCT-80CS

(USA) 14BLADEAL

14” (355mm) Wood 

Cutting Blade*

(USA) GW355TCT-60

*Complies with EN 847-1

Содержание S355 MCS

































































Отзывы:

Нет отзывов