Evolution RAGE-B, Оригинальное руководство пользователя, Страница: 8 / 16

www.evolutionbuild.com 8
h) Never use damaged
or incorrect blade washers or bolt.
The blade washers, flanges and bolt were
specially designed for your saw, for optimum
performance and safety of operation. Replace
with genuine spare parts if damaged or worn.
i) Do not use High
Speed Steel (HSS) saw blades
k) Inspect the machine and the blade
before each use.
Do not use deformed,
cracked, worn or otherwise damaged blades.
l) Never use the saw without the original
guard protection system.
Do not lock the
moving guard in the open position. Ensure that
the guard operates freely without jamming.
m) Only use blades that comply with the
characteristics specified in this manual.
Before using accessories, always compare
the maximum allowed RPM of the accessory
with the RPM of the machine.
ASSEMBLY
Your Evolution Power Tools saw is shipped
complete. Remove all contents from the
box and inspect to ensure no damage was
incurred during shipping, and that the items
listed below are included.
ITEMS SUPPLIED QTY
Instruction Manual 1
Allen Key 1
185mm Multi Blade (fitted) 1
Parallel Edge Guide 1
INTENTED USE
The circular saw with the supplied multi-
purpose saw blade is designed for cutting
;
Mild Steel Plate:
Max Thickness - 6mm
Mild Steel Box Section:
Max Wall Thickness - 3mm
Wood:
Max Thickness at 90
0
- 60mm
SPECIFICATION
RAGE1B1852/RAGE1B1852EU 1200W
(230v 50/60 Hz) (Watts)
RAGE1B1851
1050W
(110v 50/60 Hz) (Watts)
Maximum Box Cutting Capacity 90
0
(3mm wall) 60mm
Maximum Box Cutting Capacity 45
0
(3mm wall) 40mm
Optimum Cutting Thickness
(Mild Steel Plate)
6mm
RPM No Load (min
-1
) 3700
Recommended Maximum Duty Cycle 30mins
Blade Diameter:
185mm
Bore Diameter 20mm
Thickness 1.7mm
Noise and Vibration Data
Sound pressure level:
96.8. dB(A) K 3 dB(A)
Sound power level:
107.8. dB(A) K 3 dB(A)
Vibration level:
2.048m/s
2
K 1.5m/s
2
Wear hearing protection, especially when
sound pressure is over 80 dB(A). The declared
vibration total value has been measured in
accordance with a standard test method and
may be used for comparing one tool with
another. The declared vibration total value
may also be used in a preliminary assessment
of exposure.
WARNING: The vibration emission during
actual use of the power tool can differ from the
declared total value depending on the ways in
which the tool is used. The need to identify
safety measures and to protect the operator
are based on an estimation of exposure in the
actual conditions of use (taking account of all
parts of the operating cycle, such as the times
the tool is switched off, when it is running
idle, in addition to trigger time).