Evolution RAGE-B, Оригинальное руководство пользователя, Страница: 12 / 16

Adjustment of the Cutting Angle
1. Loosen the Bevel Locking Screw found at
the front of the saw.
(Fig. 6)
2. Tilt the blade to the required angle. (Fig. 7)
3. Tighten the Bevel Locking Screw securely
Note:
An angle scale (0
0
- 45
0
) is incorporated
into the Bevel Locking quadrant to aid setting.
Operating Advice
Carry out routine safety checks each time you
use the machine. Check that all safety guards
are operating correctly, and that all adjustment
handles/screws are tightened securely.
Check that the blade is secure and installed
correctly. Also check that it is the correct
blade for the material being cut.
Check the integrity of the power cord.
Always clamp the workpiece to a rigid support
such as a bench or saw horse whenever
possible.
ON/OFF Trigger Switch
This machine is equipped with a safety start
trigger switch.
To start the tool:
• Push in the safety lock button on the side of
the handle with your thumb.
• Depress the main trigger switch to start the
motor.
(Fig. 8)
Cutting Advice
The operator should wear all relevant PPE
(Personal Protection Equipment) necessary
for the job at hand. This could include safety
glasses, dust masks, safety shoes etc.
The operator should always be aware of the
position and routing of the power cable.
www.evolutionbuild.com 12
FIG 6
FIG 7
FIG 8
0-45
o