Evolution FURY62102, Оригинальное руководство пользователя

Страница: 20 / 132

20
www.evolutionpowertools.com
HOLD DOWN CLAMP (Fig. 9)
A Hold Down clamp is supplied with the Fury6.
Two sockets (one on either side) are incorporated into the rear
of the machines fence.
• Fit the pillar of the clamp into the socket that best suits the
cutting application, ensuring that it is pushed fully down.
• Tighten the fence thumbscrew to lock the pillar of the Hold
Down Clamp into the fence socket.
• Put the workpiece onto the rotary table and against the fence.
• Adjust the Hold Down Clamp so that it securely holds the
workpiece to the rotary table.
• Before attempting any cutting check to ensure that the
clamp does not interfere with the blade path as the Cutting
Head is lowered.
OPERATING INSTRUCTIONS
MITRE SAW CONFIGURATION
WARNING:
It is important that the operator is adequately trained
in the use, adjustment and operation of the machine, and has
read the Instruction Manual before commencing operations.
Note: We recommend that when the Fury6 is being used as a
Mitre Saw, the complete Fence Assembly is removed from the
machine as stored safely for future use.
1. Releasing the Cutting Head
Note:
When configured in Mitre Saw mode the Cutting Head will
be automatically locked in its upper position with the Retractable
Lower Blade Guard completely covering the blade teeth.
To release the Cutting Head press and hold the Cutting Head
Release Lever.
Gently press down on the Cutting Head Handle to lower the
Cutting Head. The operation of the Retractable Lower Blade
Guard is automatic.
Note:
We recommend that when the machine is not in use the
Cutting Head is locked in its down position, with the Auxiliary
Lower Blade Guard correctly installed and the Cutting Head
Latching Pin fully engaged in its socket.
Fig. 9