Evolution EVO42, Инструкция по эксплуатации

Страница: 8 / 24

8 www.evolutionsteel.com
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the power tool from the
power source and/or battery pack from the
power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventative safety measures reduce the
risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these Instructions
to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of moving parts and any other
condition that may affect the power tool’s
operation. If damaged, have the power
tool repaired before use.
Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
5) General Power Tool Safety Warnings
[Service]
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the
safety of the power tool is maintained.
MAG DRILL SPECIFIC SAFETY
INSTRUCTIONS
WARNING: Mains Power Supply
Security. Due to the nature of operation of
this machine, it is of the utmost importance to
ensure the security and continuity of the mains
power supply.
Ensure that this machine has a dedicated
power supply,
and use a lock on device to
ensure that the mains power supply cannot
be interrupted or compromised accidentally.
Do not use other appliances on the same
power socket, as any variation in voltage
caused by other connected appliances could
result in the magnet deactivating. Always
use the tool on its own dedicated power
socket.
Where the power supply is provided by
an ‘onsite’ generator set, ensure that the
generator set is reliable and well maintained,
and that the fuel tank contains sufficient fuel
to allow completion of the task. The addition
of warning labels is strongly recommended.
1) TRANSPORTING and HANDLING.
Mag Drills are heavy machines, care must be
taken when transporting and handling
.
• When transporting or moving the Mag Drill,
always use the carrying handle or other
carrying aids provided.
• Always ensure that the dovetail slide is in its
lowest position and locked in place.
• Do not transport or move the Mag Drill with a
cutter attached.
• If the coolant feed system is fitted, ensure
that the coolant feed tap is in the off position,
or the coolant system has been drained.
• If the Mag drill is to be transported in a vehicle
ensure that it is laid on its side and is secured
to prevent movement.
• Do not transport the Mag Drill with the mains
cord and plug dragging along the ground.
• Never carry or drag the machine using the
mains cord.
Carrying your Magnetic Drill
Safety Advice
• Although compact, this Magnetic Drill is
heavy. To reduce the risk of back injury, get
competent help, if required, whenever you
have to lift the drill.
• To reduce the risk of back injury, hold the tool
close to your body when lifting. Bend your knees
so you can lift with your legs, not your back. Lift
by using the transportation/lifting handle.