MOVING WASH 36x8Z Manual Ver. 1.02
Page 14
Introduction
Th an k you for s e le ct in g th i s p ro fe s sio n al f ix tu re fro m e vo li te
Th is n e w inte ll ige nt Mo vi n g B ea m wi ll p ro vid e y ou rel iab i li ty, l ate st feat u re s, an d
p rofe s si on al li gh tin g effec t s for a l on g p eri od o f ti m e.
Th is e voli te fi xtu re i s co mp l y in g wit h E u rop ea n sta n d ard s : EN60598-
1:2008+A11:2009 EN60598-2-17:1989+A2:1991 et RoHs.
Device Description
> 11 channel DMX-512 .
> Pan :630
°
/tilt:270
°
.
> 36pcs 8W RGBW QUAD LED
> Zoom angle from 18 degree to 55 degree
> Variable electronic strobe.
> Variable electronic dimmer(0-100%).
> LED display menu with invert.
> Reset to factory settings option.
> Pan/tilt invert option.
> Fan cooled.
Installation
o
Rigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
IMPORTANT!OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working load limits,
installation material being used, and periodic safety inspection of all installation material and the projector. If
you lack these qualifications, do not attempt the installation yourself, but instead use a professional structural
rigger. Improper installation can result in bodily injury and or damage to property. The projector had to be
installed out of the reach of people
Always secure your fixture with a safety cable !
o
DMX 512 Connection
The wires must not come into contact with each other, otherwise the fixture will not work at all or properly.
Please note the starting address depends upon which controller is being used. Only use a DMX cable and 3-pin
XLR-plugs and connectors in order to connect the controller with the fixture or one fixture to another
