Evolite MOVING BEAM 12x10, Руководство пользователя, Страница: 16 / 20

MOVING BEAM 12X10 Manual Ver. 1.02 Page 16
o
Auto Mode
From Main Menu , select the Auto mode by selecting the icon “RUN MODE” , and then you choose
one of the Auto Mode from AUTO1 to AUTO8.
For the “sound” Auto mode, select “sound” in the “RUN MODE” menu.
o
DMX Mode
DMX mode is selected in the main menu (make sure fixture is not in Auto Mode).
You can control the projectors individually via your DMX-controller
Just select the fixture address, knowing that this address will be the start address. ( 1
st
DMX channel).
The MOVING BEAM 12x10 provides 2 DMX modes:
1- 11 channels DMX mode
2- 15 channels DMX mode.
These 2 channels are selected in the main menu by the RUN MODE / DMX function.
Note. If 2 MOVING BEAM are addressed with same DMX value, they will move exactly the same way.
o
DMX-protocol
Channel
Value Function
1
0-255
Dimmer
0-100% dimmer
2
0-255
Red
0-100% Red
3
0-255
Green
0-100% Green
4
0-255
Blue
0-100% Blue
5
0-255
White
0-100% White
6
0-255
Built-in Dimmer
Built-in dimmer 0-100%
7
0-255
Pan Movement
Pan movement
8
0-255
Tilt Movement
Tilt movement
9
0-255
Pan Fine
Pan fine
10
0-255
Tilt Fine
Tilt fine
11
0-255 Pan/Tilt speed
Pan/ Tilt speed
12
0-255
Strobe
Strobe from fast to slowly
13
Built in Program