MOVING BEAM 12X10 Manual Ver. 1.02
Page 15
Address
DMX address
001-->512
Fixture DMX Address
Run mode
DMX
11 CH / 15CH
DMX Mode
Auto
Auto1 --> Auto8 Auto Mode
Sound detection
YES/NO
Auto mode sound controlled
Manual
Pan
0-->255
PAN position manual adjustment
Tilt
0-->255
TILT position manual adjustment
Red
0-->255
Red Dimmer Manual adjustment
Green
0-->255
Green Dimmer Manual adjustment
Blue
0-->255
Blue Dimmer Manual adjustment
White
0-->255
White Dimmer Manual adjustment
Language
English
YES/NO
Français
YES/NO
Set up
ID code
000-->025
Fixture Identification number
Pan Reverse
YES/NO
PAN rotation reversed
Tilt Reverse
YES/NO
TILT rotation reversed
Fade Delay
YES/NO
Dimmer speed adjustment
Signal Link
YES/NO
Code wheel
YES/NO
Auto correction PAN & TILT position
Tem switch set
YES/NO
Switch ON/OFF the temperature security
Temperature set
50° -120°
Temperature adjustment
Screen Saver
MODE 1 /2/OFF LCD OFF when unit running
Display reverse
YES/NO
LCD Display reverse
Factory set
YES/NO
Load factory values
Reset
YES/NO
Total reset
Motor X offset
-128 / +127
Manual position correction for PAN
Motor Y offset
-128 / +127
Manual position correction for TILT
System Info
On time
Total time "unit ON" for each use
Run time
Total time "unit ON" since 1st time used
Ver
Firmware version displayed
Running mode
Actual running mode displayed
DMX Address
DMX address displayed
Temperature
Temperature displayed