EDIKIO
ACCESS
37
APPENDIX B
DECLARATIONS OF CONFORMITY
In this section, you will find the certification for your Edikio Access printer.
Declarations of Conformity
Concerning Safety and Electromagnetic Compatibility of Radio Equipment
(Directives RED 2014/53/EU, BT 2014/35/EU, CEM 2014/30/EU and (RoHS2)
2011/65/EU)
Manufacturer name:
Evolis
Manufacturer address:
14, avenue de la Fontaine
Z.I. Angers Beaucouzé
49070 Beaucouzé, France
Equipment name:
Edikio Access
Manufacturing year:
January 2017
I, the undersigned,
Mr.
Serge Olivier
,
Declare under my own responsibility, that the product described above is in
conformity with the essential applicable requirements of the
RED 2014/53/EU,
BT 2014/35/EU, CEM 2014/30/EU and (RoHS2) 2011/65/EU) Directives
:
Article 3.1 a: (electromagnetic compatibility protection requirement)
Safety standard applied
EN60950-1: 2006 + A11 + A1 + A12 + A2
EN50364: 2010
Article 3.1 b: (electromagnetic compatibility protection requirements)
EMC standard applied
EN55032: 2012
EN55024: 2010
EN61000-3-2: 2014
EN61000-3-3: 2013
EN 301489-3: 2013 (V1.6.1.)
Article 3.2: (effective use of the radio frequency spectrum to avoid damaging interference)
EMC standard applied
EN300 330-2 V1.6.1
Full name: Serge Olivier
Title: R&D Director
Date: 30 January 2017
Signature:
EUROPE -
Norway Only: This product is designed for and IT power system with phase-to-
phase voltage of 230 V. Earth grounding is via the polarized, 3-wire power cord.
FI: "Laite on liitettävä suojamaadoitus koskettimilla varustettuun pistorasiaan"
SE: "Apparaten skall anslutas till jordat uttag"
NO: "Apparatet må tilkoples jordet stikkontakt"
DK: „Apparatets stikprop skal tilsluttes en stikkontact med jord, som giver forbindelse
til stikproppens jord“.
FCC Federal Communications Commission notice
Radio frequency interference in the United States
The Edikio Access model complies with the following specification: FCC
Part 15, Subpart A, Section 15.107(a) and Section 15.109(a) Class B Digital
device
Additional information:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try the following measures:
- Reorient or relocate the receiving antenna.
- Move the equipment away from the radio or television.
- Connect the equipment to a circuit other than that to which the receiver is connected.
- Consult the supplier or an experienced radio/TV technician.
Use of a shielded twisted pair cable is necessary to comply with the restrictions laid down by part 15 of the
FCC Rules for Class B digital devices.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications made to this equipment without the
express, written consent of the company Evolis may cause harmful interference and void the FCC authorization
to operate this equipment.
We recommend keeping a distance of 20 cm between the user and the RFID module when it is in operation.
This device is compliant with the RSS of Industry Canada applicable to radio devices exempt from licensing.
Its use is authorized under the following two conditions: (1) The device must not cause jamming and (2) the
device user must accept any radio-electrical jamming it experiences, even if this comprises its operation.
Japanese radio frequency interference (VCCI)
This equipment is Class B information technology equipment based on the rules laid
down by the Voluntary Control Council For Interference by Information Technology
Equipment (VCCI). Its use in or close to a residential area may cause radio interference.
If this occurs, you must take appropriate steps.
