DUPLIPASS
13
Changing the language
By default, the application is in the English language. If you want to change the language, go to Options>Language and select the language in
the scroll-down menu.
Standby mode
It is set on 30 minutes.
Pairing the Famoco device with the Bluetooth network
When you receive the device, it is already paired to the printer Bluetooth network.
But in case of device replacement due to failure, you will need to do the pairing again.
1
Go to the dashboard by pressing the volume-up button for three seconds and then release it.
2
In the Connectivity menu, press on Internet. Scroll down and check the Bluetooth tab is enabled.
Press on Bluetooth to display the available devices. Select the network that is called
Duplipass_ serialnumberoftheprinter.
3
If no device is displayed, press Pair New Device. Then select the device
that is called
Duplipass_ serialnumberoftheprinter.
Reminder : check your printer serial number displayed under the machine.
Volume-up button