2.
Press
【
+
】
or
【
-
】
to set the desired temperature. Set the temperature in between
the first 6 and 32
℃
℃
.
3.
Press
【
swing wind
】
to set the discharge blades in the correct position. The slats can
move up and down automatically in the swing position and can be locked in the desired position.
Pay attention:
The actual air inlet temperature is displayed during cooling.
When the cooling capacity of the water in the water tank is used up (water temperature is 50 ° C), the
air conditioning automatically stops cooling. The water must then cool down to be able to cool again.
It is also possible to use the ' cold storage' function to cool the water. It is also possible to replace the
water in the air conditioning for cold water in order to be able to switch back to cooling mode.
5. Dehumidify
1.
Press
【
mode
】
to the to select dehumidify .
2.
Press
【
+
】
or
【
-
】
to set the desired temperature. Set the temperature in between 20
℃
and 32
℃
.
3.
Press
【
swing wind
】
set the discharge blades in the correct position. The slats can
move up and down automatically in the swing position and can be locked in the desired position.
Pay attention:
The actual air inlet temperature is displayed during dehumidification .
6. Cold storage
1.
Press
【
mode
】
to select the cold storage mode .
2.
Press
【 ＋ 】
or
【
-
】
to set the temperature for cold storage. The lower the
temperature, the bigger the cooling capacity. Set the temperature range between - 6
℃
and 5
℃
.
3.
After completion of the cold storage function , the air conditioner will switch to standby
mode automatically .
Pay attention:
