Evoke eddie, Руководство пользователя

Страница: 4 / 16

4
Rear Panel
The port and control panels are on the back of EDDIE. It is imperative that the port is at
least 12” from the back wall for optimum bass performance.
There are midrange and tweeter level controls. They are preset during the burn-in at the
factory. At 12 O’clock, EDDIE is set for flat response. Depending on the acoustics of your
room or personal taste you may want to adjust them. Counter clockwise lowers output.
Clockwise increases output.
The left speaker binding post is for the positive (+) lead of your amplifier. The right
speaker binding post is for the negative (-) lead of your amplifier. NEVER connect or
disconnect these leads with the amplifier turned on.
You can find your serial number in the lower right corner. After the # sign, the serial
number of this speaker would be “EDDIE 0000”. Your speaker will have a number other
than “0000”.