evoheat Evo Control 17, Руководство по установке и эксплуатации, Страница: 11 / 24

10 Evo Control 17 & 25 Manual
5.2.3 Switching Modes
At the main interface, you can switch between the modes of cooling, economic heating, heating & rapid heating by
pressing
. Example: Switch from Cooling mode to Economic Heating
Note: The operation of mode is invalid if the unit you purchase is heating only or cooling only.
5.2.4 System State Checking
At any interface you can enter the system working state by pressing TWICE, then using the UP and Down arrow
keys to highlight the required parameter, then press
to enter. To exit, press the ON/OFF button
5.2.5 Changing Temperature
At the main interface, press the UP or DOWN key to adjust the temperature setting as desired. Once complete, press
the
button to save the settings and exit. Press the ON/OFF button to exit without saving settings. Refer to the
Parameter Table to set relevant temperature.
5.2.6 Clock Setting
At the main interface press to enter the clock setting interface. Select the parameter you wish to change and
press to make the parameter begin flashing which indicates it can be changed. Press the UP or DOWN keys to
change the parameter value, then press to save. Press the ON/OFF button to return to the main menu.
Note: If there is no operation after 10 seconds, it will return to the main menu and changes will automatically be saved.
To change the date, the same process is followed.