EVOC PPC-1561, Руководство пользователя

Страница: 68 / 73

EVOC One-Button-Recovery Operating Instructions
- 28 -
PPC-1561
for the first time (that is to say, the data shall be backed up following the
foresaid steps). Otherwise, the recovery is invalid.
B. Operating Steps:
1. Enable or disable EVOC One-key Recovery Function.
Press “DEL” key to enter the BIOS Setup interface after the power-on interface
appears.
(1) Find the BOOT option in BIOS Setup interface, set the EVOC Backup
option to [Enable] or [Disabled] the EVOC One-key Recovery Function.
(2) As for the implementation on SATA hard disk, please set the operating
mode of the SATA hard disk first. Enter Advanced->IDE
Configuration->set ATA/IDE Configuration to Enhanced, which is to
improve the backup and recovery speed of the hard disk for EVOC
One-key Recovery Function. Please restore the setting after system backup
or recovery.
(3) Press “F10” to save and reboot.
2. Enter system backup & recovery interface.
When EVOC One-key Recovery function is enabled, it will prompt “Please Press
button <RCV> for System Recovery within 3 Seconds!!”; at that time, press the
button <RCV> at the back of the panel PC within 3 seconds and the system will
enter system backup and recovery interface.
3. Implementing system backup
After entering the system backup & recovery interface, it will inquire the user
whether to implement system backup. If the user chooses to skip system backup,
then it will enter system recovery directly. The operating system will display the
following information:
Welcome to EVOC-Backup-System
Website: http://www.evoc.com
*************************************************************"
* [save] backup the system
* [restore] restore the system