EVOC ERC-1004A, Руководство пользователя

Страница: 80 / 133

Device Connection
- 8 - ERC-1004A
3. Device Connection
3.1 Notices before Connection
Warning
Peripherals with reverse polarity must not be connected or built-in.
Warning
The device only operates when connected with grounded power. No operation is
allowed when the device power is ungrounded or only impedance is grounded.
Warning
Rated voltage of the device in use shall be in accord with power feature of the
product.
Note:
Only the peripheral devices approved for industrial application can be used. When
operating the PC, hot swappable IO modules (USB) can be used. The IO devices
without hot swap function can only be connected when the PC is powered off.
3.2 Product Grounding
Low impedance ground connection is more helpful to release the interference
produced by the external cables, the signal cables or the cables connecting the IO
module to the grounding system.
Ground Terminals
The grounding terminal
①
on the
device (large surface or large area
contact) shall be connected with
the cabinet installed with the PC
or the central grounding busbar
on the device. The minimum
cross section area of the cable
shall be no less than 5mm
2
.
1
ERC-1004A-11/12/13configuration
other configuration