manualshive.com logo in svg

EVOC 104-1816CL2NA, Руководство пользователя, Страница: 84 / 101

Поделиться
Скачать
EVOC 104-1816CL2NA Скачать руководство пользователя страница 84

 

BIOS Setup 

 

- 28 - 

104-1816CL2NA 

 

* DP-to-LVDS Panel Type

 

This option is used to set resolution, color depth, single/dual-channel of LVDS. It 

must be set according to LVDS screen in use. If the set value is not consistent with 

the LVDS screen in use, there would be no display or abnormal display.   

* GFX Boost 

This option is the switch of graphics card GPU turbo boost function. 

* PAVC 

This option is audio, video protection control switch. When this technology is 

enabled, the audio and video are protected during the whole transmission and play 

process. Note: if Blu-ray Disc is played, this option must be enabled.   

* DVMT Pre-Allocated 

    This option is used to set DVMT 5.0 pre-allocated graphics memory capacity, i.e. 

graphics memory capacity occupied by IGD.

 

* DVMT Total Gfx Mem 

  This option is used to set total graphics memory capacity which can be used by 

IGD device.   

* ISP Enable/Disable 

    This option is used to enable or disable ISP device.

 

* ISP PCI Device Selection     

    For Windows startup, it is set to ISP PCI Device as B0D2F0. For Linux startup, it is 

set to LSP PCI Device as B0D3F0.   

 

 

 

Содержание 104-1816CL2NA






































































































Отзывы:

Нет отзывов