EVOC 104-1816CL2NA, Руководство пользователя, Страница: 80 / 101

BIOS Setup
- 24 - 104-1816CL2NA
 SATA Mode
SATA controller type selection, with two options: IDE and AHCI.
Note: When AHCI is selected for system installation, Floppy device and drivers
corresponding to the chipset may be needed.
 Serial-ATA Port1~2
Switch of SATA Port. When it is set to Disabled, the corresponding SATA port
cannot be used.
 SATA Port1~2 HotPlug
Switch of SATA device hotplug. If hotplug is needed, the corresponding option
must be set to Enabled.
 OS Install Selection
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Advanced
OS Selection [Windows 8.x]
→←
：
Select Screen
↑↓
：
Select Item
Enter
：
Select
+/-
：
Change Opt
F1
：
General Help
F2 ： Previous Values
F3 ： Optimized Defaults
F4 ： Save&Exit
ESC ： Exit
Version 2.15.1234 Copyright (C) 2012 American Megatrends, Inc.
 OS Selection
When installing or using operating system, this option must be set correctly. For
example, when Windows 7 is installed or used, this option must be set to
Windows 7, otherwise blue screen may occur to system installation, or the
installed system cannot be loaded.
Note: Android option is for testing only. Because of lack of corresponding drivers,
Android system is not fully supported for the moment.