Evo Trim Kit for Evo Affinity 25G, Инструкция для владельца и по установке, Страница: 29 / 39

INSTALLATION INSTRUCTIONS
A f f i n i t y 2 5 G
29
Evo America, LLC 20360 SW Avery Ct., Tualatin, OR 97062 USA
Phone 503.626.1802 | Fax 503.213.5869 | evoamerica.com | support@evoamerica.com
RECOGNIZING ABNORMAL GAS OPERATION
Any of the following are considered to be abnormal operation and may require servicing:
• Excessive yellow tipping of the burner fl ame (See diagram above).
• Sooting up of cooking utensils.
• Burners not igniting properly.
• Burners failing to remain alight.
• Gas valves, which are di
ffi cult to turn.
In case the appliance fails to operate correctly, contact the authorized service provider in your
area.
Right
Flame Wrong
Flame
Dark Blue Dark Blue
Light Blue Light Blue
Yellow Tip
Excessive
Yellow Tipping
Remove cooking surface
and drip pan to access
valve cover located just
above center control knob
and under the drip pan.
Checking Venturi Tubes:
A clogged venturi tube due to insects and insect nests may
cause improper burner performance and di
ffi culty lighting
your grill.
To check your venturi tubes for insect nests:
• Remove the cooking surface to access the burners.
• Pull the ori
fi ce retaining clip away from each Inner and
Outer burner venturi tubes to remove the gas tube
system from the venturis.
• Next, remove the three phillips-head screws that retain
the burner assembly and remove the burners and
visually inspect inside the venturi ports.
• If insect nests are found, the best method is to use a
thin piece of wire or bamboo skewer to remove the
obstruction.