Page 16
10.3.3.
Take out the air filters elements, clean them well in paraffin and dry it. Squeeze DO
NOT WRING
10.3.4.
After wetting the filter elements by clean engine oil, squeeze it tight by hand.
10.3.5.
Lastly, put the filter elements into the filter housing and install it securely.
10.4.
Spark Plug
10.4.1.
Use - spark plug – BPR5ES or BPR6ES.
10.4.2.
The spark plug electrode should be a Tan colour.
10.4.3.
To clean spark plug use a small brass wire brush.
10.4.4.
Spark plug gap should be 0.7mm to 0.8mm (0.028” to 0.031”).
On completion of this operation you MUST make sure that the fuel tap is
tightened securely.
10.5.
Fuel Tap.
10.5.1.
Stop the engine.
10.5.2.
Empty fuel tank and make sure fuel tap is higher than the fuel
inside the tank
10.5.3.
Turn the fuel tap (cock) lever to “OFF”.
10.5.4.
Clean with solvent.
10.5.5.
Wipe off.
10.5.6.
Check filter, clean as required.
10.5.7.
Check the gasket. Replace it if damaged.
Fuel tap shown in ON position.
Содержание EVO3100
Страница 23: ...Page 23 NOTES ...
