Evo Power EVO3100, Руководство пользователя

Страница: 11 / 24

Page 11
5. STARTING THE ENGINE USING IGNITION KEY (EVO7000/EVO9000L models only)
Before starting the engine;

Turn ‘OFF’ the AC switch.

DO NOT connect any electrical appliances to the machine.
5.1.
Turn the fuel tap to ‘ON’ position.
5.2. Turn the engine switch to ‘ON’
5.3. Slide the choke lever to the ‘Choke’ position. Not necessary when engine is warm.
5.4. Insert key and turn to the start position – hold this against
spring tension for approximately 10 seconds.
5.5. Once the machine starts to run release the key and let it rest
at the run position.
5.6. If machine does not start after first attempt - wait for 60
seconds and attempt a restart.
5.7. Warm up the engine, then slide choke lever back to the 'RUN'
position.
5.8. Continue to warm engine for a few minute without load.
The battery is mounted under the control panel - EVO7000/EVO9000L models
only
6. USING MACHINE
6.1.
Using AC output.

Make sure the electrical apparatus to be powered is turned 'OFF'
before plugging into socket outlet.

Make sure that you do not exceed the rated load of the machine.
o
To increase the life span of the generator, it is recommended
that you do not consistently load the machine and ideally use it
at 75% of machines rated capacity.

Make sure that the load current is within the rated current of the
outlet socket.

DO NOT change voltage changeover switch whilst engine is running.
RUN Position CHOKE Position